Biodynamizer sistem za živo vodo
Po naročilu
Biodynamizer sistem za živo vodo
Biodynamizer sistem za živo vodo je rešitev za pripravo, filtracijo ali izboljšanje vode, zasnovana za boljšo kakovost vode pri vsakodnevni uporabi.
Za pripravo, filtracijo ali izboljšanje vode pri vsakodnevni uporabi.
Izdelek je namenjen uporabnikom, ki želijo vodo obravnavati kot pomemben del vsakodnevnega udobja, zdravja in profesionalne predstavitve.
Ključne prednosti
- primerna rešitev za dom, pisarno, wellness ali profesionalni projekt
- poudarek je na kakovosti vode, praktični uporabi in dolgoročni vrednosti
- zasnova podpira boljši uporabniški občutek in zanesljivo delovanje
Ostali artikli
-
LifeEnergy LOHAS blender
240,00 € -
LIFEENERGY Pro destilator
190,00 € -
PurePro® ionizator vode JA-103
640,00 € -
KYK Generation 2 ionizator vode
1.400,00 €
Customers Also Viewed
-
SweetCraft 60 Food 3D Printer
3.800,00 € -
Megahome destilator vode
310,00 € -
VULCANUS® Pro Camp žar
2.436,00 € -
KYK filtri
Zaćetek: 92,00 €
-
Hydra
950,00 €
Technical specifications
Core technical data for the Biodynamizer whole-home living water system.
| Product type | Whole-home inline living water / biodynamization system |
|---|---|
| Working principle | Mechanical vortices, magnetic fields and natural mineral frequency transmission |
| Installation point | After the drinking-water meter on the main cold-water line |
| Flow rate | 3.6 m³/h (60 L/min) at 3 bar |
| Operating pressure | Minimum 3 bar, maximum 6 bar |
| Pressure resistance | Metallic aquifer section resistant up to 80 bar |
| Connections | 3/4" fittings (outer Ø 26.4 mm, inner Ø 18 mm) |
| Dimensions | Length with fittings: 90 cm × outer cylinder diameter: 16 cm |
| Weight | Approx. 19 kg |
| Power supply | No electricity required |
| Maintenance | No maintenance, no consumables |
| Materials in contact with water | Copper, brass and silver |
| Installation notes | Install via dielectric hoses (multiskin), with a non-return valve upstream, and keep the unit more than 80 cm away from electrical sources such as the main electrical supply, electrical panel or photovoltaic inverter |
| Compliance notes | Manufacturer states compliance for metals in contact with water, metal-release testing for potable water use, and Belgaqua conformity according to EN1717 when installed with an upstream non-return valve |
| Tightness test | Each unit is pressure-tested by the manufacturer at 10 bar for 5 minutes under water |
| Legal warranty | 2 years |
Important technical note
Final installation suitability should always be confirmed against the incoming water quality, available pressure, main-line layout and local plumbing requirements before purchase and installation.
| Prevoz iz | Hrvaška |
|---|
Napišite svoj komentar
Share your experience with this product and help others choose more easily

Loading...