Kinetic Reactor is a multi-functional water treatment device that uses an existing water stream for its efficient operation, which does not require additional energy and chemicals. In the heart of Kinetic Reactor chamber, hydrodynamic cavitation, oxidation processes and mechanical forces are used for water treatment. This is the first major difference to existing technologies for water treatment – Kinetic reactor is not a filtering device.
Kinetic Reactor is very capable devices for:
- Lime scale Prevention
Calcium carbonate re-crystalyses into aragonite structure instead of ordinary calcite structure. That means less and easier cleaning of your sink and dishes and better water efficiency of water heaters.
- Reduction of chemical contamination
Kinetic Reactor removes or reduces HEALTH-HAZARDOUS organic and inorganic elements in the water, including soluble Iron, Manganese, Lead, Cadmium etc.
- Reduction of micro-biological contamination
Kinetic Reactor is very capable in microbiological desinfection of the water. Tests showed general reduction of fecal bacteria (e-coli, enterococci), coliform bacteria (Pseudomonas aeruginosa) and clostrides with spores (Perfringers sporiae).
- Reduction of water treatment chemicals like Chlorine and Fluorides
Water with excessive Chlorine content is genotoxic which means it can damage your DNA! Kinetic Reactor removes all of Chlorine from your drinking water.
- General improvement of water's look, smell and taste.
M24 is the most common Kinetic Reactor for the faucet use. There is the highest probability this is the variant you need to order. However, to be on the safe side please consider:
- M24 unit comes together with the metal housing with a thread on the outer side.
- The diameter of the housing is 24 mm.
- M22 unit comes together with the metal housing with a thread on the inner side.
- The diameter of the housing is 22 mm.
If your faucet is using a unique housing (designer faucets etc.), you can only replace the original aerator mesh with the Kinetic Reactor chamber insert, but retain the original housing of the unit.
Replacement of the entire unit
Simply remove the faucet aerator from your faucet. Use a wrench if necessary. Clean the threads of the faucet for easier installation. Install new faucet Kinetic Reactor set on to faucet by hand. Turn on faucet. If leak occurs, tighten more firmly.
Simply remove the faucet aerator from your faucet. If a wrench is necessary, place cloth over aerator to prevent damage. Clean the threads on the faucet for easier installation. Place the new Kinetic Reactor insert into the original housing. For housing with outside threads, use thicker washer. Install spout by hand. Turn on faucet. If leak occurs, tighten more firmly.
Replacement of the threaded insert
Remove the faucet aerator insert from your faucet. Sometimes a special tool is needed, like the one from the image below. Clean the threads on the faucet for easier installation. Place the new Kinetic Reactor unit directly in to faucet. Done. Turn on faucet. If leak occurs, tighten more firmly.